AMI
BTSorb 100 Series
Dynamic Sorption Analyser
- Cost-effective dynamic sorption analyser for breakthrough and adsorption studies.
- Multiple modes for competitive adsorption and diffusion coefficient measurements.
- User-friendly BTManager software with automated control and advanced data analysis.
Key Features
Capabilities
The BTsorb 100 offers 5 modes for breakthrough curve and competitive adsorption analysis, enabling dynamic evaluation of gas or gas/vapor mixture separation. It also includes 2 dedicated modes for diffusion studies using chromatography and the zero-length column method.
5 Modes for Breakthrough Curve & Competitive Adsorption:
2 Modes for Diffusion Coefficients:
Software
BTManager is a user-friendly software platform that enables precise control of all experimental processes, while automatically recording data and calculating test results. It offers a range of features designed to simplify and support user operation.
√ In addition to standard procedures, the software allows full customization of experimental steps to meet specific testing requirements.
√ All experimental steps and data are automatically recorded, making it easy for users to review and analyze results.
√ As part of a fully automated system, BTManager enables conditional controls based on time, temperature, pressure, and detector signals—ensuring precise execution, repeatability, and accuracy.
√ Includes advanced features such as blank adsorption correction, true flow calibration, abnormal data detection, and TCD signal calibration—minimizing environmental and system influences for highly reliable results.
Applications
Small Molecule Hydrocarbon
CO2 Capture
Solid Adsorbents
Direct Air Capture
Specifications
| BT Sorb 100 Series |
Breakthrough Curve and Mass Transfer Analyzer |
Breakthrough Curve Analyzer |
Model |
100 S Pro |
100 SLP Pro |
100 SMP Pro |
100 S |
100 SLP |
100 SMP |
100 SHP |
| |||||
| Breakthrough Curve | √ | √ | √ | √ | √ | √ | √ | |||||||||
| Competitive Adsorption | √ | √ | √ | √ | √ | √ | √ | |||||||||
| Adsorption Isotherm | √ | √ | √ | √ | √ | √ | √ | |||||||||
| Cyclic Stability | √ | √ | √ | √ | √ | √ | √ | |||||||||
| Temperature Swing Adsorption | √ | √ | √ | √ | √ | √ | √ | |||||||||
| Pressure Swing Adsorption | / | √ | √ | / | √ | √ | √ | |||||||||
| Diffusion Coefficient | √ | √ | √ | / | / | / | / | |||||||||
| Pressure Range | Atmospheric | Atm -10 bar | Atm -40 bar | Atmospheric | Atm -10 bar | Atm -40 bar | Atm -100 bar | |||||||||
| MFCs | 4 MFCs (1 carrier gas + 3 adsorbate gases) with a variety of flow ranges | |||||||||||||||
| Gas Inlets | Standard 4 ports, expandable with multi-channel gas inlet controller (Optional) | |||||||||||||||
| Vapor Dosing | Up to 2 vapor generators can be configured (Optional) (temperature control via circulating water baths, with a temperature range of -10°C to 90°C) |
|||||||||||||||
| Temperature Control | Standard: Heating module: Ambient – 400 °C; Circulating water bath: -10 – 90 °C; Option: Heating furnace: Ambient – 1000 °C; (Continuous temperature control from -10 °C to 400 °C can be achieved through the combined use of heating module and circulating water bath) |
Standard: Heating module: Ambient – 400 °C; Option: Circulating water bath: -10 – 90 °C; Heating furnace: Ambient – 1000 °C; (Continuous temperature control from -10 °C to 400 °C can be achieved through the combined use of heating module and circulating water bath) |
||||||||||||||
| Detector | Standard: High precision Thermal Conductivity Detector (TCD) Option: Mass spectrometer (100amu – 200/300 amu optional) |
|||||||||||||||
| Column | Standard: 1 ml and 4 ml 316SS Option: 1 ml and 4 ml quartz; column for ZLC |
|||||||||||||||
| Corrosion Resistance | Standard: Corrosion-resistant TCD Option: Sulfur-resistant corrosion protection gas path upgrade; passivation treatment of fittings and tubing is mainly used for sulfur-containing gases (such as H₂S) and high-concentration corrosive gases. |
|||||||||||||||
| Air Compressor | Used to drive pneumatic valves (option) | |||||||||||||||
| Appearance Parameters | L 31.9 in (810 mm) × W 31.1 in (790 mm) × H 34.6 in (880 mm), 330 lbs (150 kg) | |||||||||||||||
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sampleOutstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.
LeanneB-375
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255