Our phone lines are down, this issue has been reported and is being dealt with.
In the meantime please telephone 020 4641 9660 or email info@meritics.com – we apologise for any inconvenience.

Yokogawa Fluid Imaging Technology
FlowCam 5000

Affordable FIM Analysis (Flow Imaging Microscopy)

  • Measurement range 3 μm to 300 μm
  • Compact and Portable
  • Real data down to 10nm

Download
brochure
   Request
quote

Beckman Coulter LS 13 320 XR Laser Diffraction Particle Size Analyser 21 CFR Part 11

FlowCam 5000 Affordable FIM Analysis – Experience rapid high-resolution imaging, data acquisition, and analysis of microparticles.

FlowCam 5000 flow imaging instrument is an economical, high-value solution for monitoring particles in the 3 μm to 300 μm size range for research, educational, and commercial applications.

Overview

FlowCam 5000 is a flow imaging microscopy instrument targeted to your specific needs for a wide range of applications. Its compact footprint allows for flexible use in a variety of settings. Accommodate small to large sample volumes for routine and specialised particle monitoring and research. Experience superior image quality and image-based measurements that yield statistically relevant data.

Benefits

  • Automate your data collection with a fast, accurate, and easy-to-use alternative to manual microscopy
  • Analyse tens of thousands of particles per minute
  • Go beyond size and count to analyse shape and type of your particles
  • Correlate morphology information with material performance
  • Characterise microparticles with as little as 250 µL of sample
  • Save time and resources with an instrument optimied for your application

Technical Specs

Size Range

3 μm to 300 μm

Magnification

Single objective (Select 4X or 10X or 20X), manual focus

Minimum sample Volume

250 μL

Sample flow rate

up to 1 mL/min, configuration specific

Camera type

High resolution (1920×1200 pixels) CMOS. Monochrome and color available

Software

Easy-to-use instrument with fully integrated VisualSpreadsheet software

Applications

Food and Beverage

Environmental Research

Not sure if it’s the right instrument?

No worries, send us a sample and we will test it for you

Send a sample

Outstanding service

I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.

LeanneB-375

Good service, very helpful

We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.

SophieH-2201

Job done in a friendly manner

Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.

ThierryN

Service/calibration visit

Excellent service, arrived on time, polite, friendly and informative.

NathamM-270

5 Stars

Excellent service from an excellent company. Would recommend them to anyone.

BarryH-480

Good Service

David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful

TomA-446

Superb and prompt service

I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….

JamesG-2483

Good experience over two years

Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.

RajG-62

Fully committed to customer service

Service second to none, both units serviced and all questions answers by engineer while on site.

RichardA-786

Highly recommend Meritics for equipment purchases and aftercare services

After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.

Excellent Service

Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.

NaomiT-64

Service of lab equipment

Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.

NathanM-270

Excellent

Excellent communication. Updates given well in advance. Very polite staff and engineers.

NathanM-270

Multisizer 4e install at pharmaceutical company

2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.

Chloel-9

Service of Beckman Coulter instruments

Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.

NeilT-394

Professional

Friendly and collaborative staff, provided a very good service.

SamK-403

Professional, Customer-oriented, fast service

We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.

VeerleB

Very helpful and prompt

I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.

AlexH-474

Excellent Service

Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.

I would highly recommend

GavinR-101

Excellent and Friendly Service

Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.

JanetH-255