3P Instruments
mixSorb L Series
Breakthrough Curve Analyser
- Broad temperature reange
- Broad pressure range
- Investigate arbitrarily complex dynamic sorption processes
Key Features
- Determination of breakthrough curves
- Investigation of kinetic performance of adsorbents
- Investigation of co-adsorption and displacement
- Determination of sorption selectivity
- Reasonable downscaling of technical separation
- Dynamic adsorption and desorption experiments
- Determination of single- and multi-component adsorption data
- In-situ sample preparation up to 400 °C
- Fully automated control via PC
- Automated regulation of the adsorber pressure up to 10 bar
- Up to 4 high precision mass flow controllers
- Automated built-in gas mixing
- Measurement of inlet and outlet gas composition
- Pre-tempering of inlet gas and tempering of adsorber
- Monitoring of inlet gas temperature
- Determination of heat profiles in the adsorber with four temperature sensors
- Monitoring of pressure drop along the adsorber
- Built-in Thermo Conductivity Detector (TCD)
- Optional gas analysis via interfaced Mass Spectrometer
- Safety guard sensor for flammable gases for automatic shut down
- Enhanced Safety by intelligent illuminated workspace
Models
Techniques
Vapour Adsorption
Accessories
Optional small adsorber column
- (d = 1 cm, h = 6 cm) with temperature probe
- 1 temperature sensor
Vapor option for mixSorb L
- to supply gas-/vapor mixtures
- possibility to transport liquid mixtures in the evaporator
Vacuum Option
- Allows connection of a vacuum pump for sample pre-treatment or measurment atlower pressures or for evacuation of the adsorber < 1 bar (membrane- or scroll-vacuum pump)
Mass Spectrometer
- for investigation of ternary or quaternary gas mixtures
- different Mass Spectrometer are available
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sampleOutstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.
LeanneB-375
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255