Oven temperature control
Oven temperature control system with a range of RT-50°C and a temperature accuracy of ±0.1°C, designed to mitigate the impact of ambient.
AMI
RuboSORP MPA Series
Gas Adsorption and Gas Separation Analyser
- Wide pressure range: vacuum to 200 bar.
- Configurable with 1, 2, or 3 independent analysis stations.
- Optional BET surface area analysis capability for added versatility.
Key Features
-
Additional volume chamber
Multiple standard volume chambers are available (100 ml, 200 ml, 500 ml, 1000 ml) for the acquisition of more precise kinetic data.
Diverse Sensor Configurations
The MPA system allows multiple stations to share sensors while also supporting the complete independence of up to three stations, offering both cost- effectiveness and high efficiency.
Safety design
The MPA features over- temperature and over- pressure alarms with automatic shutdown in alarm situations.
Software
The MPA is equipped with a user-friendly software interface that allows programming of all measurement parameters. The system calculates the amount of gas adsorbed by the sample in real time. Adsorption data is displayed online and fitted using appropriate isotherm models.
The MPA allows for testing up to three sample materials across a wide range of pressures and temperatures with high efficiency. The instrument is fully automated and intuitive, requiring no user supervision during operation.
Specifications
| Category | Specification |
|---|---|
| Analysis Ports | 1 / 2 / 3 |
| Pretreatment | In-situ |
| Pressure Range | Vacuum – 200 bar |
| Pressure Sensor Configuration | Optional ranges: 0-10 bar, 0-50 bar, 0-100 bar, 0-200 bar; Accuracy: 0.01% FS |
| Gases | Non-corrosive gases: H₂, CO₂, CH₄, N₂, etc. |
| Temperature Range | RT – 500°C −196°C to 0°C (Option) −10°C to 95°C (Option) Custom higher temperatures available on request |
| Sample Tube Volume | Standard: 10 ml (other volumes optional) |
| Sample Tube Temperature | Detection accuracy: ±0.01°C Control accuracy: 0.1°C |
| Oven Temperature Control | Air bath, 30-50°C |
| Additional Volume Chamber | Up to 2 chambers, multiple volumes available (Option) |
| Vacuum System | Mechanical pump + turbo molecular pump (minimal 10⁻⁸ Pa, Option) |
| Model Options | 1S | 2S | 2P | 3S | 3P |
| Number of Pressure Sensors (including manifold) | 2 | 4 | 2 | 5 | 2 |
| Available Options | BET Capabilities *Additional pressure sensors can be added per station |
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sampleOutstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.
LeanneB-375
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255